Product features

 1) TN type of black letters and blue black ground  LCD screen, using microcomputer control   technology, each channel are independent control. 

2) Automatic identification of rechargeable Ni MH / Li battery and according to the current status of intelligent selection of trickle / constant current, constant voltage charging mode and negative voltage to fill the judgment .

3) A cylindrical nickel-metal hydride or lithium ion battery can be charged quickly for a diameter below 26mm, a height of 34-70mm, a voltage of 3.7V or 3.8V, and a lithium polymer battery.

4)This charger uses DC 12V 4A adapter input, With battery reverse connection protection, short circuit protection,1.2V & 3.7V battery mix charging and The input voltage over-voltage protection alarm function.

5)With TN LCD screen, the charging process is intuitive, and can be synchronized to display the battery changing time ,  internal resistance,simulate the percent of the power, the exact amount of electricity, battery voltage and it can remember the charging time, at any time you can choose to switch 0.25A/0.5A /0.75A/1/1.25A/1.5A/1.75A or 2A charging current.It can be charged with 2A in each channel in the same time.

6) Discharge current is 0.1—0.4A for lithium battery; 0.1—1A for Ni-MH battery.

7) This charger can charge and discharge at the same time,Not affected by any.

8) It can test the Voltage,charging current,temperature,capacity,charging time and resistance of the battery.

9)With sound alarm function When the battery charged full or unusual,the charger will sound.

10)With power bank discharging out put ,it can use one lithium battery to charge the mobile phone as the power bank.