The advantage of the notebook is the largest mobility, and provide the basis for all this is the battery. When the energy saving technology and battery technology to temporarily difficult to have a breakthrough, fully optimize the battery and master some use of relevant skills will be very helpful. However the notebook battery used for a long time, often dissatisfied with the charge, or even to display cell damage, and therefore must be some tips for operations with special attention in use.
A selection of the best time, repair
Laptop battery aging is an inevitable phenomenon, the principle of repairing method for almost all of the trial "deep charging and release", in order to alleviate the batterymemory effect. But undeniable, charging and discharging operation depth is not goodfor the notebook battery itself, is a kind of method to and shall not be. If the battery lifeby a mere a few minutes, so care should be taken to this method of operation. In addition, manufacturers have been carried out to optimize the battery does not existindependently, the depth charging and discharging can be battery capacity upgrade again saying. But exactly when to depth charge and discharge is difficult to grasp,after all, each use of power consumption is not the same, therefore, suggest that youuse BatteryMon this professional software tools (Tips: it is recommended that youdownload through online search, here is not to provide download address.).
BatteryMon is a specific laptop battery monitoring of small software, especially for those who do not have a built-in power management chip and software of the machine, it has undoubtedly helped many busy. BatteryMon is the biggest characteristics can show the discharge curve, and the installation will be automatic operation. Discharge curves of a good performance of the battery will have a very regular, overclocking basically every drop one time probably are the same. And iffound to be beating very abnormal, so it is necessary to carry out a "deep chargingthe battery discharge" repair.
Two, "deep charging" basic method
Battery calibration is an effective method to deal with aging batteries, generally speaking, each brand notebook will have a dedicated battery calibration software. For example, IBM's ThinkPad series of discharge specific software, recommended for alluse IBM notebook users. But the procedure needs to be repeated 3 times to get the best results, download software and discharge after the execution, the system will prompt the production installation disk. Using the setup disk boot PCDOS, suggesting that AC pulled out the power supply, discharge the software will automaticallydischarge control. When it was over the notebook will automatically shut down, then we can connect the AC power supply to charge, the time control in 9 ~ 12 hours,repeated 2 ~ 3 times.
For the activation of laptop batteries, our key to find suitable discharge software. If your laptop unfortunately no discharge of special software, you can click on closeBIOS and Windows power management functions, then the battery depletion does notrun any program in the case, then in the boot state charge to 80% or so, repeated several times is also to manual "deep charge and deep discharge". In fact, the purpose of this approach is to let the battery lasts low current discharge, and thedischarge state is impossible to achieve in our day-to-day use, the effect with thosespecial discharge basically the same software.
Notebook computer battery repair tools and tips
The advantage of the notebook is the largest mobility, and provide the basis for all this is the battery. When the energy saving technology and battery technology to temporarily difficult to have a breakthrough, fully optimize the battery and master some use of relevant skills will be very helpful. However the notebook battery used for a long time, often dissatisfied with the charge, or even to display cell damage, and therefore must be some tips for operations with special attention in use. |